搜了网 | 设为主页 注册 | 登录
您现在的位置:主页 > 塑料系列 > 青岛塑料托盘回收电话

青岛塑料托盘回收电话


青岛塑料托盘回收电话
分享到:
产品型号:1140*1140* 原产地:
品牌:其他 产品数量:10000
价格:1元 产品关键字:耐冲击吹塑托盘
行业: 包装 >托盘 >塑料托盘
发布时间:2022/11/18 17:46:36

企业信息

  • 公司经营性质:生产型
  • 电话:027-83899033
  • 地址:湖北武汉市东西湖区东西湖区惠安大道慈惠街宏图天盛

产品描述

品牌乔丰型号多种
托盘面数双面托盘进叉方式局部四向进叉托盘
上部结构箱式托盘型式网格九脚型
加工定制材质PP
适用范围周转、运输
    

  吹塑托盘 (blow moulding pallet )优点优势编辑● 吹塑托盘能配合机械叉车和手动液压搬运叉车使用,完成对货物的搬运、周转、堆码。有机械叉车和手动液压搬运叉车通用的四面叉口,产品可在无条件使用机械叉车的场地和环境中使用。● 吹塑托盘产品选用高分子量高密度聚乙烯树脂,经挤出一次吹塑成型。成型过程快速、充分;产品成型饱满,内在质量和性能稳定。● 吹塑托盘产品造型新颖别致,结构设计合理,表面为凹槽设计,防滑性好,无边角余料。● 吹塑托盘承载能力:静载荷:6~7T;动载荷:1~2T;架空载荷:1~1.5T。突出特点编辑降低成本:吹塑托盘高强度、高刚度吹塑托盘通过改进结构设计与采用特殊吹塑方法可以大幅度提高吹塑托盘的刚度与强度,并且可实现吹塑托盘表面平整,从而提高对使用环境的适应性能与使用寿命;可大幅度的降低使用成本。环保性能好:吹塑托盘无毒无味,耐酸碱盐的腐蚀,易于清洗消毒,不腐烂,同时废旧托盘可回收利用,符合环保要求。

  安全性能好:不助燃、不导电、不产生静电、防滑、无毛刺飞边、无其他辅助连接,可确保货物和作业者的安全。

  Advantages and advantages of editing

  The blow molding trays can be matched with mechanical and manual hydraulic forklift handling forklift, completion of cargo handling, stacking, turnover. Forklift truck and manual hydraulic handling forklift truck general, the product can be used in the field of mechanical forklift and the use of the environment.

  The blow molding tray products are made of high molecular weight high density polyethylene resin by extrusion blow molding, a. The forming process is fast and full, the product is full, the inner quality and the stable performance.

  ] blow molding tray product modelling novel, reasonable structure design, surface groove design, non slip, no edge material.

  The blow molding tray: the static load carrying capacity: 6~7T; 1~2T; dynamic load: overhead load: 1~1.5T.

  Prominent feature editing

  Reduce the cost: blow molding tray, high strength, high stiffness of blow molding trays through improved structure design and the special blow molding method can improve blow molding trays of stiffness and strength, and the realization of blow molding tray, smooth surface, so as to improve on the use of the environment adaptation performance and service life, greatly reducing the use cost greatly.

  Environmental protection performance is good: blow molding tray non-toxic tasteless, acid and alkali salt corrosion, easy to clean and disinfect, do not decay, at the same time the waste tray can be recycled, in line with environmental protection requirements.

  Good safety performance, combustion, non-conductive, does not produce static, anti-skid, no sharp edges and burrs, no other auxiliary connection, ensure the safety of goods and operator.

  双语对照


青岛塑料托盘回收电话

相关产品

产品系列

企业电子地图
企业视频展示
在线给我留言
在线和我洽谈

友情链接

湖北世纪乔丰塑业有限公司
吴经理02:29:13
您好,欢迎光临湖北世纪乔丰塑业有限公司,请发送您要咨询的内容。